Eminent EM8651 Manual download pdf (Page 6)

ENGLISH

4.2 Activated

If the motion sensor is triggered more than 2 times within 3 minutes the device

switches automatically to power saving mode. The motion detector will activate again

if it does not register motion for a time period of 3 minutes.

4.3 Pair the motion detector

Enter the password and press button on the control panel.

The LED will turn on. Press 2x the test button of the motion detector you wish to

beeps this indicates this sensor is already registered.

Notice: During the registration process be sure no other sensor is triggered. If a

motion detector is in the same room make sure you cover the motion detector or place

the motion detector temporarily in a different room.

5.0 Installation tips

Avoid installation of the motion detector in range of a window, air-conditioning,

radiator, refrigerator, oven, direct sunlight or other places with high temperature

fluctuation.

Do not place 2 motion detectors facing each other or within each other’s range.

Motion detectors are usually placed at 2 meters from the floor on the wall.

First install the mounting bracket before placing the motion detector in the bracket.

Point the detector in the direction you wish to secure. Test if the motion detector is

working properly in test mode.

1 2 3 4 5 6 7 8 9 10

No comments

Eminent EM8651 Manual Page 6