Eminent EM6561UK User Manual

EM6561/EM6564 Wireless Internet Camera

10 | ENGLISH Image 8 4. Fill out an IP-Address at ‘IP Addr’. Make sure this IP-Address is in the same range as the IP-range of your current networ

11 | ENGLISH Image 9 Note: If the ‘HTTP Port’ is changed, it means this port needs to be forwarded to be able to access the camera externally. In c

12 | ENGLISH 3.1 Making a wireless connection manually 1. Double-click the ‘IP Camera Tool’ icon on your desktop. 2. If correct, the name of the ca

13 | ENGLISH 7. Place a mark at ‘Using Wireless LAN Settings’ 8. Click ‘Scan’ after which the camera will search for wireless networks within reach

14 | ENGLISH Image 13 13. You need to fill out the network security key at ‘Share Key’ in case you are using WPA or WPA2. Image 14 14. Click ‘

15 | ENGLISH 17. Once the camera has restarted, you need to double-click the ‘IP Camera Tool’ icon which is located on your desktop. 18. If correct

16 | ENGLISH Image 16 10. Click the IP-Address rule and click ‘Next’. 11. The software will start searching for wireless networks within range. 1

17 | ENGLISH Image 18 15. You need to fill out the wireless security key. 16. Click ‘Next’. 17. If the security key has successfully been writt

18 | ENGLISH Image 20 23. Double-click the name and IP-Address rule to wirelessly login to the webpage of the camera. Note: When opening the soft

19 | ENGLISH 5.0 Accessing the camera 5.1 Making the camera visible from the internet for a computer or mobile phone Before you can view the images o

2 | ENGLISH EM6561/EM6564 – Wireless Internet Camera Table of contents 1.0 Introduction...

20 | ENGLISH Image 22 8. Click ‘Setup Tool’ after which the following image appears: Image 23 9. Click ‘Advanced Setup’. 10. Click ‘NAT/Routi

21 | ENGLISH Image 24 12. Fill out ‘Camera’ in the ‘Rule Name’ field. 13. Fill out the camera’s IP-Address in the LAN IP address’ field, for exam

22 | ENGLISH Image 25 17. Click ‘Add’, after which the new rule will be added to the list. 18. Click ‘Save’ to save the settings. 19. The port fo

23 | ENGLISH 2. If correct, the name of the camera and IP-Address will be shown, as shown in the following image: Image 26 3. Double-click the n

24 | ENGLISH 4. Click on the ‘+’ button (add camera). 5. Enter the network address, port, username and password of the camera. 6. Click ‘test’ to

25 | ENGLISH pressing the name tab, the image of the camera will be shown. Hint: The Mobiscope version we have been using with the iPad is version 1

26 | ENGLISH 3. Install this application. 4. Start the application ‘IP Cam Viewer Lite’. 5. It is possible a list will be shown with the changes i

27 | ENGLISH 11. Press the ‘Save’ button to save these settings. 12. If the IP Cam Controller software is started again, the camera can be accessed

28 | ENGLISH 5.10 Accessing the camera through the internet, using other mobiles phones with the Windows Mobile, Java or Blackberry operating system

29 | ENGLISH Note: DynDNS has previously been a free service. However, at this moment DynDNS is a paid service. Note: In order to be able to use www

3 | ENGLISH 7.1.2 FTP Service Settings... 35 7.1.3 Alarm Service Se

30 | ENGLISH Image 28 8. Click the arrow at the ‘DDNS Service’ dropdown list after which the following list appears: Image 29 9. Select your D

31 | ENGLISH Note: The correct port must have been forwarded to your camera to be able to access the camera using the DDNS function! 6.0 Recording t

32 | ENGLISH Image 31 9. If you want to specify a location where you want to save the recording to, browse to the specific location at the ‘Set Re

33 | ENGLISH 14. Select the camera you want to record from (the camera(s) which are available will only be selectable at the numbers ‘1’ till ‘9’.

34 | ENGLISH Image 34 3. Double-click the name and IP-Address rule. 4. A username and password will be asked. The default* username and password

35 | ENGLISH 8. At ‘Sender’, fill out your own e-mail address. 9. At ‘Receiver’, fill out the e-mail address of the recipient(s). 10. At ‘SMTP Se

36 | ENGLISH Image 37 2. Fill out the data of your FTP server (The IP-Address of your FTP server, the port number etc). 3. If a mark is placed at

37 | ENGLISH 5. Click ‘Submit’ to save these settings. 7.1.3 Alarm Service Settings 1. Click ‘Alarm Service Settings’, after which the following i

38 | ENGLISH Image 40

39 | ENGLISH 8.0 Explanation of the webpage of the camera In the paragraph below, we assume you logged in to the camera using Internet Explorer. The

4 | ENGLISH your garden or driveway. Nothing will get by you! Thanks to the infrared functionality, the camera can also be used perfectly at nighttim

40 | ENGLISH Image 42 Note: The audio features of the EM6561 camera are just for surveillance use, and not for a high quality ‘phone’ conversation

41 | ENGLISH 4. At ‘Resolution’, you can change the resolution of the image. 640x480 delivers the highest possible image quality. 5. At ‘Mode’, yo

42 | ENGLISH Image 45 Alias Settings In the ‘Alias Settings’ menu, you can change the name of the camera to your own liking. Also see the followin

43 | ENGLISH needed. If you are located in the Netherlands, you should select ‘Brussel, Paris, Berlin etc’ as ‘Timezone’. Activate ‘Daylight Saving T

44 | ENGLISH Image 48 Basic Network Settings At this menu, the network can be setup. You can choose whether DHCP needs to be used, fixed IP-data ca

45 | ENGLISH Image 49 UPnP Settings If UPnP Setting is enabled, and your router support UPnP, the camera and router will determine automatically wh

46 | ENGLISH DDNS Service Settings Because a name can be remembered more easily than IP-numbers, and an Internet IP-Address can change, you can make

47 | ENGLISH boot’ if you want the camera returns to it’s original position when rebooted of restarted. Click Upward, downward, leftward or rightwar

48 | ENGLISH Image 53 Backup & Restore Settings In this menu, you can make a back-up of the current settings. You can restore a setting by brow

49 | ENGLISH Also see the following image as reference: Image 55 Reboot Device Using this menu, you can completely reboot the camera. Also see th

5 | ENGLISH 2.2 Using the wired connection It is advisable to connect the camera to your wired network first. Once the camera has been setup correctl

50 | ENGLISH In this menu, an overview will be shown. This overview contains information about the computers which have logged in to the camera. The

51 | ENGLISH Finland +35 8942415826 Local Costs Germany 1805 982 234 €0.14 Italy +39 0240042016 Local Costs Norway +47 21075033 Local Costs S

52 | ENGLISH Also, you will find frequently asked questions in the FAQ section. It is highly recommended to consult the FAQ section. Very often the a

6 | ENGLISH Image 2 5. The default username and password are: • Username: admin • Password: admin 6. Click ‘Login’. 7. A notification will ap

7 | ENGLISH 8. Click the notification after which conformation is asked. Allow this to be installed. 9. Once the ‘DVM_IPcam2.ocx’ has been install

8 | ENGLISH Image 5 5. In order to change the current username and password, you can fill out another username and password instead of the current

9 | ENGLISH Hint: Fill out the camera’s new Username and Password below. This way, you always have the correct information at hand! Camera Username: