Eminent hdMedia Stream Manual download pdf (Page 9)

9 |

ENGLISH

8. Use the arrow keys to navigate to ‘Transition Effect’ and press the ‘Enter’ button

on the remote control.

9. You can now decide how the media player switches to the next photo or image.

Choose ‘Normal’ and the media player will switch to the next photo or image

without any additional effect. Choose ‘Fade’ and the current image will fade out

before switching to the next photo or image, the new photo or image appears

faded and slowly the image will appear bright and sharp on screen. Choose

‘Random’ to let the media player decide how to switch to the next photo or image.

10. Press the ‘Back’ button on the remote control.

11. Use the arrow keys to navigate to ‘Interval time’ and press the ‘Enter’ key on the

remote control. Select the amount of time needed before switching to another

photo or image.

12. Choose the desired setting and press the ‘Enter’ key to confirm and to save the

altered settings.

13. Press the ‘Back’ button on the remote control.

5.6 Network settings

In the following steps we will explain how to setup the media player for network usage.

1. Use the arrow keys to navigate to ‘Network’ and press the ‘Enter’ button on the

remote control.

2. ‘Network setup’ is selected by default. Press the ‘Enter’ button on the remote

control.

3. You have two options:

DHCP (recommended)

Choose ‘DHCP’ if there is a DHCP server in your network which can provide the

media player the correct IP-Address settings. Press the ‘Enter’ button on the

remote control.

Static

Choose ‘Static IP’ if there is not a DHCP server in your network which forces you

to fill in the correct IP-Address settings yourself. Press the ‘Enter’ button on the

remote control to advance in the IP-Address settings menu. Follow the

instructions on the screen to enter the correct settings. You will need to enter an

IP-address within the IP range of your network, and it needs to be unique. The

subnet mask, gateway and DNS addresses are the same as used in your

network.

4. Now use the arrow keys on the remote control to navigate to ‘Device name’ and

press the ‘Enter’ button on the remote control.

5. Fill in a name using the remote control. With this name the media player will be

visible within your network. After given a name, navigate to ‘OK’ and press the

‘Enter’ button on the remote control to confirm and to save the altered settings.

6. Press the ’Home’ button on the remote control in order to return to the media

player’s main menu.

7. Congratulations! The media player has been setup and is ready to be used!

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

Comments to this Manuals

No comments

Eminent hdMedia Stream Manual Page 9

Comments to this Manuals

Related products and manuals for Digital media players Eminent hdMedia Stream