Eminent EM6561 Installation Guide download pdf (Page 15)

15 | ENGLISH

2. Select one or more flood sensors for this water alarm.

3. Alarm Events: You can use a scene (created in one of the previous chapters) to

be triggered on different events.

a. Alarm not available:

Once the water alarm is not available the selected scene will be

triggered. For example once the battery is empty for a long time.

b. Alarm armed:

When the water alarm is armed, the selected scene will be triggered.

Note that the water alarm will be armed on start-up of the e-Centre.

c. Alarm fired:

When one or more flood sensors detects water , the selected scene

will be triggered. For example, if you have defined a scene called ‘All

On’ which switches all lamps on in your house, you will be able to find

your way out of your house once the sensor detects a flooding.

4. Siren Settings: The e-Centre has a siren function with several sounds and

settings you can change.

d. Siren Sound: Select one of the 5 sounds to be played once this alarm

is triggered

e. Siren Sound Duration: Change this setting if you want to have the siren

to go off a longer or shorter period (in minutes).

f. Maximum number of Siren Count: The number of times the siren

should go off.

5. Portal Settings: Enable this option if you want to send a signal to the e-Domotica

Portal once a water alarm is detected. This allows you to notify yourself and/or

contact persons about the water alarm.

This option is only possible if your e-Centre is connected to the internet and

registered on the portal.

6. Click Save to save the settings. You will return to the previous page

automatically.

3.5.3 Absence Alarm

If you use one or more EM6580 or EM6581 Motion Sensors or EM6570

Window/Door Contacts, you can setup an Absence alarm.

You can use the absence alarm when you leave your house for a certain period, for

example going to work. When enabling the alarm using your PIN code, the selected

sensors will be armed. Once the sensors detect movement or an open door/window

they will send a signal to the e-Centre. If the Entry Time has expired the e-Centre will

fire the alarm and send a signal to the portal to notify you and your contact persons

about this alarm.

Note that once you have armed the Absence alarm, the touch screen will show only

the PIN code window. You cannot control your lights using the touch screen until you

have disarmed the alarm with the correct PIN code.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 46 47

No comments

Eminent EM6561 Installation Guide Page 15