Eminent EM6561 Installation Guide download pdf (Page 40)

40 | ENGLISH

5. Click ‘Add’ to add an action performed by this scene.

6. Select the device you want to invert (a lamp) from the ‘Device’ pull-down list.

7. Select ‘Switch’ from the ‘Feature’ list.

8. Select ‘Invert’ from the ‘Action’ list.

9. Click ‘Save’ to save this action for the scene. You will automatically return in the

Scene edit page.

10. Click ‘Save’ to save the scene. You will return to the ‘Scenes’ page.

Create a Scenario

Now that the special invert scene has been created, you can create a scenario to

execute this scene.

1. Go to the Scenarios page, by clicking ‘Scenarios’ in the left menu.

2. Click ‘Add’ to add a scenario.

3. Enter a name for this scenario, for example ‘Hotel switch’.

4. Select the scene you created earlier, in this example called ‘Invert lamp’.

5. Now you can add an event. Click ‘Add’.

6. Select ‘Z-wave devices’ from the ‘Group’ list.

7. Select one of the EM6514 Wall Switch Sensors from the ‘Device’ list.

8. Select ‘Switch’ from the ‘Feature’ list.

9. Click ‘Save’ to save this event for the scene. You will return to the scenario edit

page automatically

10. Repeat step 5 to 9 for the second EM6514 Wall Switch Sensor.

11. You should see the following (with different device names)

Image 29 – Hotel Switch scenario example

12. Click ‘Save’ to save this scenario.

13. Press both existing wall switches (with built in EM6514 Wall Switch Sensor) to

check if this scenario works properly.

Hints:

1. If you want too, you can add more devices or lamps to the ‘Invert’ scene.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47

No comments

Eminent EM6561 Installation Guide Page 40