Eminent hdMEDIA User Manual download pdf (Page 9)

9 | ENGLISH

3. If the media player will be used mainly during night-time, the ‘Night Mode’ can be

set to ‘ON’ or ‘Comfort’. This way, low-level audio content such as dialog will be

increased making it easier to hear at low volume levels. At the same time, the

intensity of higher-level audio content will be reduced.

4. Select ‘Surround Sound’ and press the ‘OK’ button. Select ‘5.1CH’.

5. Set ‘Digital Output’ to ‘HDMI LPCM’

6. Set ‘Advance Setup’ to ‘Off’.

7.3.2 If connected to a HDMI DTS receiver:

Refer to the manual of your HDMI receiver to make sure which codecs are supported.

The steps shown are default settings and are normally useable for a HDMI receiver.

1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.

2. Select ‘Audio’.

3. If the media player will be used mainly during night-time, the ‘Night Mode’ can be

set to ‘ON’ or ‘Comfort’. This way, low-level audio content such as dialog will be

increased making it easier to hear at low volume levels. At the same time, the

intensity of higher-level audio content will be reduced.

4. Select ‘Surround Sound’ and press the ‘OK’ button. If your HDMI receiver

supports ‘Dolby True HD’, select ‘TrueHD’. If your HDMI receiver does not

support ‘Dolby True HD’, select ‘5.1CH’.

5. Select ‘Digital Output’ and press the ‘OK’ button. Set ‘Digital Output’ to ‘HDMI

RAW’.

6. ‘Advance Setup’ is set to ‘On’ by default. If this setting is not set to ‘On’, press the

‘OK’ button and select ‘ON’.

7. Select ‘AC3 Output’ and press the ‘OK’ button. Set ‘AC3 Output’ to ‘HDMI RAW’.

8. Select ‘DTS Output’ and press the ‘OK’ button. Set ‘DTS Output’ to ‘HDMI RAW’.

9. Select ‘AAC Output’ and press the ‘OK’ button. Set ‘AAC Output’ to ‘HDMI LPCM’

or ‘HDMI LPCM Multi CH’ if you want to hear the sound using all available

speakers.

7.3.3 If connected to a DTS receiver using the coaxial or optical connection:

1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.

2. Select ‘Audio’.

3. If the media player will be used mainly during night-time, the ‘Night Mode’ can be

set to ‘ON’ or ‘Comfort’. This way, low-level audio content such as dialog will be

increased making it easier to hear at low volume levels. At the same time, the

intensity of higher-level audio content will be reduced.

4. Select ‘Surround Sound’ and press the ‘OK’ button. Select ‘5.1CH’.

5. Select ‘Digital Output’ and press the ‘OK’ button. Set ‘Digital Output’ to ‘S/PDIF

RAW’. Set ‘Digital Output’ to ‘S/PDIF LPCM’ if your receiver does not support raw

AC3 codecs.

6. ‘Advance Setup’ is set to ‘On’ by default. If this setting is not set to to ‘On’, press

the ‘OK’ button and select ‘ON’.

7. Select ‘AC3 Output’ and press the ‘OK’ button. Set ‘AC3 Output’ to ‘S/PDIF

RAW’.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 28 29

Comments to this Manuals

No comments

Eminent hdMEDIA User Manual Page 9

Comments to this Manuals

Related products and manuals for Digital media players Eminent hdMEDIA